HomeMy WebLinkAboutResolution_02-12_02/09/2012 RESOLUTION NO 2 -12
A RESOLUTION OF THE VILLAGE COUNCIL OF THE VILLAGE OF
TEQUESTA, PALM BEACH COUNTY, FLORIDA, AWARDING A
PROPOSAL. FROM GLOBAL RENTAL COMPANY OF BIRMINGHAM
ALABAMA, FOR THE PURCHASE OF ONE (1) 2012 INTERNATIONAL
BUCKET TRUCK IN THE AMOUNT OF $127,319.00, WITH FUNDING
COMING FROM THE 401, 403, & 210 ACCOUNT AND AUTHORIZING
THE VILLAGE MANAGER TO EXECUTE ON BEHALF OF THE
VILLAGE.
WHEREAS, The Village of Tequesta purchases new vehicles to better serve its residents
by being able to do different tasks throughout the Village.
WHEREAS, The Village has approved partial funding in the FY 11/12 budget.
($60,000.00)
WHEREAS, The Village will have to appropriate the unfunded balance from the 401
account ($44,758.99), the 403 account ($11,280.00) and the 210 account (11,281.00)
Council.
NOW, THEREFORE, BE IT ORDAINED BY THE VILLAGE COUNCIL OF THE
VILLAGE OF TEQUESTA, PALM BEACH COUNTY, FLORIDA, AS
FOLLOWS:
Section 1 Proposal for this vehicle attached exhibit "A"
Section 2 Resolution No. 2 -12 is hereby approved
Section 3 This Resolution shall become effective immediately upon passage.
1
The foregoing Resolution was offered by Council Member Turnquest who moved its adoption.
The motion was seconded by Council Member Brennan and upon being put to a vote, the vote
was as follows:
For Adoption Against Adoption
Mayor Tom Paterno X
Vice -Mayor Vince Arena X
Council Member Abby Brennan X
Council Member Jim Humpage X
Council Member Calvin Turnquest X
The Mayor thereupon declared the Resolution duly passed and adopted this 9 day of February,
2012.
MAYOR OF TEQUESTA
Tom Paterno
ATTEST:
PGE
0
0 .
61,E I 1 t lttJ Ut
Lori McWilliams, MMC
Village Clerk 195 ..
�C RI
11 v� °``.
Iobd. Global Rental Company, Inc.
33 Inverness Center Parkway, Suite 250
Birmingham, AL 35242
Global Rental Co., Inc. (205) 991 -7972 Fax (205) 991 -9377
Equipment Quotation
Date: 01/26/12
Customer Name: Village of Tequesta
Address:
Rental Start Date:
Bill Through Date:
Rental Rate:
Equipment Number: 027 - 19543541
Serial Number: 081 ICU 1922
Equipment Model: L42A
Manufacturer:
Year Chassis Built: 2012
Chassis Manufacturer: INTERNATIONAL
Chassis Model: 4300
Chassis Type: 4X2
VIN: 3HAMMAAM9CL615436
Mileage:
Purchase Price: 127,319.00
Rental Credit: 0.00
Buy -out: 127,319.00
Expiration Date 02/17/12
White, Russell
From: Jenny.Carlson @altec.com
Sent: Monday, January 23, 2012 12:58 PM
To: White, Russell
Subject: Fw: Village of Tequesta GSA
Please see revised PO based on GSA price. This unit is basically brand new, but the unit has been titled. Please be
aware of that and call or contact us with any questions. I know this will enable you to have the unit to use and be able to
buy it and use your accrued rental credit towards the cost.
Thanks
Jenny Roth Carlson
Altec Industries, Inc
2570 Old Okeechobee Rd.
West Palm Beach, FL 33409
teC 561 -537 -0347
fax: 561- 686 -6972
Jenn .Carlson Altec.com
-- Forwarded by Jenny Carlson /Southern / Altec on 01/231201212:55 PM - - --
From: Brian Mathews /Corporate/ARec
To: Jenny Cadson/SoutherntAltec@Altec
Cc: Mark.kellew0altec.com
Date: 01/20/2012 09:10 AM
Subject: Re: Fw: Village of Tequesta GSA
new RPO schedule
Rental
Rate by Date cies Credit PJC % Sales Price Total PJC Buyout
$ 2,400 1123112 10 $ (2,400) 100 127,319 $ (2,400) 124,919
$ 2,400 2120!12 20 $ 1,440 60°x6 $ 127,319 $ (2,880) $ 124,439
$
2,400 3119112 3.0 $ 1 440 60% $ 127,319 $ (4,320).$ 122,999
$ 2 4116112 40 $ 40 36% $ 127,319 $ (3,360)1$ 123,959
$ 2,400 5114112 50 $ (840 35% $ 127,319 $ (4,200)1$ 123,119
$ 2,400 6111 f12 60 $ 040 35% $ 127,319 $ 5,040 $ 122,279
$ 2,400 719112 7.0 $ 44 36% $ 127319 $ 5 880 $ 121,439
$ 2,400 $16112 $.0 $ 040] 35% $ 127,319 $ (6,720) $ 120,599
$ 2,400 913112 9.0 $ (840) 35% $ 127,319 $ (7,560) $ 119,759
$ 2,400 10 h 2 10.0 $ 40 35% $ 127,319 $ $,400 $ 11$,919
$ 2 10129112 110 $ 40 35% $ 127,319 $ (9,240) $ 118
$ 2,400 11126112 120 $ 44 35%1$ 127,319 $ 10,0$0 1 117,239
Brian Mathews
Global Rental
33 Inverness Center Parkway Suite 250
Birmingham, AL 35242
tel. 205- 437 -4074
fax: 205 -991 -9377
bri n.mathews alec.com
4 WGIOball
1
ALTEC INDUSTRIES, INC.
Contract #: GS- 30F -I 028G
ORDER PRICE REVIEW
Quoted for: Village of Tequesta QUOTE # TBD
Customer Contact:
Phone: /Fax: /Email:
Quoted by: Travis Evans Date:
Phone: 919 - 528 -8059 /Fax: 919 -764 -4015 /Email: travis.evans@altec.com
REFERENCE ALTEC MODEL: L42A Base Price $127,319
Per GSA Specifications in GSA Catalogue plus Options below
A. GSA OPTIONS IN CATALOGUE
1
2
3
4
5
B. OPEN MARKET ITEMS
1
2
3
4
5
TOTAL FOR UNIT AND CHASSIS..... $127,319
C. ADDITIONAL ITEMS items are not included in total above
t3E
"Pricing valid for 45 days"
NOTES
PAINT COLOR: White to match chassis, unless otherwise specified
WARRANTY: 12 months or 12,000 miles parts and labor, 90 days travel charges for chassis
and mounted equipment (parts only for overseas customers).
TO ORDER: To order through GSA, please contact Jeffrey Myers at phone(703) -605 -2951,
email:jeffrey.myers@gsa.gov. To order through Altec, please contact Chet Borden.
CHASSIS: Per Altec Commercial Standards & GSA Pricelist
DELIVERY: No later than 210 -240 days ARO, FOB Customer's CONUS Destination
TERMS: Net 30 days, Govt Credit Card Accepted (surcharge may apply)
FET TAX: If chassis over 33K GVWR, a 12 % FET may be applied
BEST VALUE: Altec boasts the following "Best Value" features: Altec ISO Grip Controls for
Extra Protection, Only Lifetime Warranty on Structural Components in Industry, Largest
Service Network in Industry (Domestic and Overseas), Altec SENTRY Safety Training (Web
and CD- Based), Dedicated /Direct Govt Sales Manager, In- Service Training with Every
Order.
BUILD LOCATION
Quote Number:
Altec, Inc.
January 10, 2012
Our 83rd Year
Bill To:
Village of Tequesta
Altec Quotation Number Altec Sales Order(s):
Account Manager: Jenny Carlson
Inside Sales Rep: Travis Evans
Item Description My
Unit
1. 202 - ALTEC Model L42A articulating aerial device with an insulating lower boom, 1
insulating upper boom and the Altec ISO -Grip (U.S. Patent No. 7,416,053) system, an
upper control system incorporating high resistance components at the boom tip, installed
over rear axle, built in accordance to ALTEC'S standard specifications and to include the
following features
A. Ground to Bottom of Platform Height: 41.9 ft (12.8 m) at 3.0 ft (0.9 m) from
centerline of rotation.
B. Working Height - 46.9 ft (14.3 m).
C. Maximum Reach to Edge of Platform with U pper Boom Overcenter: 32.5 ft at 6.8
ft platform height (9.9 m at 2.1 m).
D. Maximum Reach to Edge of Platform with Upper Boom Non- overcenter and
Lower Boom at 107 degrees. 26.9 ft at 22.9 ft platform height (8.2 m at 7.0 m).
E. Side -by -Side Boom Configuration: Travel height approximately 11'1" on a chassis
with approximately 40" frame height. (With standard 77.6 inch pedestal height.
This may have to be increased depending on cab configuration.)
F. Lower Boom Articulation: 0 to 107 degrees (17 degrees beyond vertical)
accomplished by single hydraulic cylinder with a spherical bearing at the lower
boom connection. Equipped with integral holding valves which lock boom in place
in the event of a hydraulic line failure and a cushion valve for controlled
movement into position at maximum lower boom articulation.
G. Upper Boom Articulation: 270 degrees in relation to lower boom, accomplished by
dual cylinders with maintenance free Patented walking link drive system.
Cylinders are equipped with integral holding valves to lock boom in place in the
event of hydraulic line failure or loss of power.
H. Pedestal- Subbase: Fabricated from a 12.75 inch outside diameter x 1/2 inch (324
x 13 mm) wall steel tube bolted onto a baseplate welded to a fabricated steel
subbase. Rotation bearing support ring is 1 -5/8 inches (41 mm) thick.
I. Lower Boom: Fabricated 10 x 12 x 3116 inch (254 x 205 x 4.8 mm) steel tube.
Length of lower boom is 192 inches (4877 mm) from centerline of lower pivot to
centerline of outer pivot.
J. Lower Boom Fiberglass Insulator: Filament wound fiberglass insulator with 9 -3/8
inch X 11 -3/8 X 5/8 inch (238 x 289 x 16 mm) wall thickness, located in lower end
of lower boom. Provides 12 inch (305 mm)clear isolation gap.
K. Upper Boom: Filament wound fiberglass with 8.0 inch (203 mm) inside diameter
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 1 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
® Altec, Inc.
contains insulated conduit for routing of hydraulic lines and fully contains upper
boom leveling system. End of boom shaft has ring for attachment of fall
protection system lanyard.
L. Rotation: Continuous rotation is provided by worm gear drive, equipped with
extended shaft for manual rotation, driving a shear ball bearing rotation gear. The
fully adjustable rotation drive assembly includes an external eccentric ring
adjustment of the gearbox pinion gear to the main rotation bearing, permitting the
ability to easily adjust backlash, reduce boom side play and ensure proper tooth
contact over the life of the unit. This reduces life cycle cost. All bearing
attachment bolts are easily accessed from outside the pedestal and inside the
turntable.
M. Platform: Molded fiberglass one -man, side - mounted, fixed mounting. Platform is
rated at 400 pounds (181 kg) without liner
N. Mechanical Platform Leveling System: A positive mechanical parallelogram
system of fiberglass insulating rods and roller chain. Adjustment of leveling
system made with turnbuckles located inside the cover on the lower boom and by
adjusting studs accessible from the lower end of the upper boom. Platform level
adjustment is easily accessible from external location on lower pivot.
O. Platform Tilting System - mechanical pin type allows easy removal of water or
debris from the platform.
P. Hydraulic System: Open center hydraulic system functions at 6 gpm and 3,000
psi (20.7 MPa). Includes 15.8 gallon (59.81) reservoir, suction strainer, return line
filter, sectional control valves and plumbing.
Q. ISO -Grip System: The Altec ISO -Grip (U.S. Patent No. 7,416,053) System
includes the following boom tip components that can provide an additional layer of
secondary electrical contact protection. This is not a primary protection system. 1.
Control Handle: An insulating single handle controller incorporating high electrical
resistance components that is dielectrically tested to 40 kV AC with no more than
400 microampers of leakage. The control handle is green in color to differentiate
it from other non - tested controllers. The handle also includes an interlock guard
that reduces the potential for inadvertent boom operation. 2. Auxiliary Control
Covers: Non - tested blue silicon covers for auxiliary controls. 3. Control Console:
Non - tested non - metallic control console plate. 4. Boom Tip Covers: Non - tested
non - metallic boom tip covers. The covers are not dielectrically tested, but they
may provide some protection against electrical hazards.
R. Hydraulic Tool Circuit: Single tool circuit at boom tip, including one (1) set of
Bruning HTMA quick disconnect couplings. Circuit provides 5.0 - 6.0 gpm (18.9 -
22.7 Ipm). Tool system relief pressure set at 2,000 psi (13.8 MPa). Operates open
center tools.
S. Lower Controls: Conventional three handle ground controls located on turntable
including interlock and upper control override.
T. Upper Boom Storage Support: a cradle and tie down strap are installed to hold
down the upper boom while roading.
U. Outrigger /Boom Interlock System: Prevents boom from being unstowed until
outriggers have been at least partially deployed (If applicable).
V. Outrigger /Unit Selector Control: Located near the outrigger controls, allows
operator to divert hydraulic oil from machine circuit for outrigger operation. This
reduces the potential for inadvertent outrigger movement during machine
operation if outrigger controls are bumped (If applicable).
W. Outrigger Motion Alarm: Provides audible alarm when any of the outrigger
controls are operated (if applicable).
X. Back -up Alarm, installed.
Y. Preventative Maintenance: Unit owner can select means of tracking maintenance
intervals by calendar time or PTO hours. If the owner selects calendar driven
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 2 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
® Altec, Inc.
cycles, preventative maintenance is required no more frequently than every 6
months. If the owner selects PTO hour driven cycles, preventative maintenance
interval is likely to be greater than 6 months. Both programs allow the equipment
owner to lower life cycle costs through higher product uptime and lower
maintenance costs.
Z. Diagnostic Pressure Test Quick Disconnect Couplings: are located at the
turntable to allow a mobile service technician to quickly and easily attach a test
gauge to verify system and tool circuit pressure. This reduces life cycle cost.
AA. Manuals: Two (2) Operator's and two (2) Maintenance /Parts manuals containing
instructional markings indicating hazards inherent in the operation of an aerial
device.
AB. Paint: Painted white with the Altec Powder Coat Paint Process which provides a
finish- painted surface that is highly resistant to chipping, scratching, abrasion and
corrosion. Paint is electro- statically applied to the inside as well as outside of
fabricated parts then high temperature cured prior to assembly ensuring
maximum coverage and protection.
2. Manual Upper Boom Stow Securing System with support cradle and tie down strap. 1
3. 222 - Upper boom stow positioned so that upper boom is at -6 degrees relative to the 1
lower boom. (standard position)
4. Pedestal 1
5. Steel Reservoir, 15 gallon capacity, triangular, 17" L x 17" W x 24" H, and includes 1
breather caps and dipsticks
6. Single, One (1) Man, Fiberglass Platform; fixed side mounted. 24 x 30 x 42 inches. 1
Altec Patented ISO -Grip Insulating 3 Function, Proportional Speed, Upper Control
Handle - with safety interlock and interlock guard. Located on the side of the platform
nearest the upper boom, mounted on the shaft. Forward /back operates lower boom
down /up, tiller operates rotation CW /CCW, and up /down operates upper boom up /down.
7. One (1) Platform Step - located on the side of the platform opposite the upper boom in 1
the stowed position
8. Platform Cover - soft vinyl, 24 x 30 inches (610 x 762 mm) 1
9. Platform Liner - for one -man fiberglass platform, 24 x 30 x 42 inches (610 x 762 x 1067 1
mm), 50 kV rating (minimum)
10. Platform Floor Liner - 24 x 30 inches (610 x 762 mm) 1
11. Hydraulic Tool Circuit at Platform: Two set of quick disconnect couplings provide a 1
maximum of 6.0 gpm at the boom tip for open center tools. Tool system relief pressure
set at 2,000 psi.
12. Engine Start/Stop & Secondary Stowage System: 12 VDC powered motor and pump 1
assembly for temporary operation of the unit in a situation wherein the primary hydraulic
source fails. Electric motor is powered by the chassis battery. This feature allows the
operator to completely stow the booms, platform, and outriggers. Secondary Stowage &
Start/Stop is activated with an air plunger at the platform or momentary switch at the
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 3 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Alec. Quote Number:
e
Altec, Inc.
lower control station and outriggers.
13. Throttle Control - Manually increase /decrease chassis engine speed to preset values. 1
Control is captive air operated from the platform and momentary switch operated from
the lower controls and tailshelf.
14. Slip Ring: Required for engine start/stop, secondary stowage system, and throttle control 1
options
15. Power Distribution Module (PDM): a compact self- contained electronic system that 1
provides a standardized interface with the chassis electrical system. (Includes Operator's
Manual)
16. No Outriggers (Requires Torsion Bars And Counterweight For Stability) 1
17. Insulating Aerial Device, ANSI Category C, 46kV and Below 1
18. Fall Protection System to include one body harness and decelerating type lanyard. 1
Harness has adjustable slide buckle on shoulder straps, Velcro chest strap, interlocking
buckles on leg straps and nylon web loop fall arrest attachment on back. Lanyard has
built in shock absorber that allows 28 inches (711 mm) of automatic adjustability
19. Altec Aerial Device Powder Painted White 1
Unit & Hydraulic Ace.
20. Subbase Weldment 1
21. HVI -22 Hydraulic Oil (Standard). 25
22. Standard Pump For PTO 1
23. Hot shift PTO for automatic transmission 1
Body
24. Altec Body 1
25. Steel Body 1
26. Aerial Service Line With Step (ASLS) 1
27. 132 Inch Body Length 1
28. 94 Inch Body Width 1
29. 46 Inch Body Compartment Height 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 4 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
Altec, Inc.
30. 18 Inch Body Compartment Depth 1
31. Finish Paint Entire Body. Undercoat Applied Under The Body 1
32. Altec White
33. 5.5 Drop -In Wood Cargo Retaining Board At Rear Of Body 1
34. 5.5 Drop -In Wood Cargo Retaining Board At Top Of Side Access Step 1
35. Stainless Steel Rotary Paddle Latches With Locks 1
36. Rigid Door Holders On All Vertical Doors 1
37, Chains On All Horizontal Doors 1
38. Standard Master Body Locking System 1
39. One Chock Holder In Fender Panel On Each Side Of Body 1
40. Hotstick Shelf Extending Full Length Of Body On Streetside 1
41. Two Hotstick Brackets On Streetside 1
42. Standard Drop -Down Hotstick Door For One (1) Shelf On Streetside 1
43. 1 st Vertical (SS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
44. 2nd Vertical (SS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
45. 1st Horizontal (SS) - Adjustable Shelf With Removable Dividers On 8 Inch Centers 1
46. Rear Vertical (SS) - Locking Swivel Hook(s) On An Adjustable Rail (Left Wall) 1
47. Rear Vertical (SS) - Locking Swivel Hook(s) On An Adjustable Rail (Rear Wall) 4
48. Rear Vertical (SS) - Locking Swivel Hook(s) On An Adjustable Rail (Right Wall) 1
49. 1st Vertical (CS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
50. 2nd Vertical (CS) - Gripstrut Access Steps With Two (2) Sloped Grab Handles 1
51. 1st Horizontal (CS) - Adjustable Shelf With Removable Dividers On 8 Inch Centers 2
52. Rear Vertical (CS) - Locking Swivel Hook(s) On An Adjustable Rail (Left Wall) 1
53. Rear Vertical (CS) - Locking Swivel Hook(s) On An Adjustable Rail (Rear Wall) 4
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 5 of it
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
® Altec, lnc.
54. Rear Vertical (CS) - Locking Swivel Hook(s) On An Adjustable Rail (Right Wall) 1
Body and Chassis Accessories
55. 24" L Tailshelf 1
56. 94 Inch Wide Tailshelf (Standard) 1
57. Steel Tailshelf Construction 1
58. Rigid Step Mounted Beneath Side Access Steps (Installed To Extend Approx. 2" 1
Outward)
59. Custom Access Step Two (2) Platform Access Steps From Body Floor. Installed one (1) 1
at curbside rear, one (1) at curbside cargo area.
60. Small Grab Handle Installed At Rear Curbside 1
61. Custom Grab Handle Curbside rear grab handle to begin at rear corner of tailshelf and 1
end on top of the rear curbside vertical. Handle may be used by the operator for both
tailshelf and compartment top access.
62. [CC (Underride Protection) Bumper Installed At Rear 1
63. Dock Bumpers (Pair), Fixed Mounting (Rectangular Bumper), Installed At Rear 1
64. T -100 Style Pintle Hitch (30,000 LB MGTW with 6,000 LB MVL) 1
65. Set Of Eye Bolts for Trailer Safety Chain, installed one each side of towing device 1
mount.
66. Platform Rest, Rigid with Rubber Tube 1
67. Lower Boom Rest Weldment 1
68. No Outrigger Pads 1
69. Wheel Chocks, Rubber with Metal Hairpin Style Handle, 9.75" L X 7.75" W X 5.00" H 1
(Pair)
70. Mud Flaps With Altec Logo (Pair) 1
71. Triangular reflector and flare kit installed in cab. Contains 3 reflectors and 3 fuses (20 1
Minutes Each). Installed in cab.
72. 5 LB Fire Extinguisher With Light Duty Bracket, Shipped Loose 1
73. Front Torsion Bar Installed On Chassis 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 6 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
® Altec, Inc.
74, Rear Torsion Bar Installed On Chassis 1
75. Install Counterweight As Needed 1
76. Slope Indicator Assembly For Machine Without Outriggers 1
77. Vinyl manual pouch for storage of all operator and parts manuals Installed in cab. 1
Electrical Accessories
78. Install secondary stowage system. 1
79. Install Start/Stop system. 1
80. Install Two Speed Throttle System. 1
81. Lights and reflectors in accordance with FMVSS #108 lighting package. (Incandescent) 1
82. Altec Standard Amber LED Strobe Light With Brush Guard Install At Front Of Body, 1
Streetside.
83. Single tone back up alarm installed between the chassis frame rails at the rear of the 1
chassis. To work in conjunction with chassis reverse drive system
84. Custom Hour Meter Wire into International PTO hour meter in dash if available. 1
Otherwise, install standard rectangular PTO hour meter
85. 6 -Way Trailer Receptacle (Pin Type) Installed At Rear 1
86. Altec Modular Panel System (AMPS) - Includes Mounting Panel and Accessory Switches 1
Finishing Details
87. Focus Factory Build 1
88. Delivery Of Completed Unit 1
89. Altec Aerial Device painted white with the Altec Powder Coat Paint Process which 1
provides a finish - painted surface that is highly resistant to chipping, scratching, abrasion
and corrosion. Paint is electro - statically applied to the inside as well as outside of
fabricated parts then high temperature cured prior to assembly ensuring maximum
coverage and protection.
90. Paint Underneath Black 1
91. Finish Paint Body And Accessories Altec White 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 7 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
Altec, Inc.
92. Apply Non -Skid Paint (Ferrox) to all walking surfaces 1
93. English Safety And Instructional Decals 1
94. Vehicle Height Placard - Installed In Cab 1
95. Dielectric test unit according to ANSI requirements. 1
96. Stability test unit according to ANSI requirements. 1
97. Inbound Freight 1
98. Installation - L42A 1
Chassis
99. Chassis 1
100. Altec Supplied Chassis 1
101. Other Chassis Model Year Current Model Year 1
102. International 4300 Set Back Axle 1
103. Chassis Color - White NAV9036 1
104. Other Chassis Cab To Axle Length 90" 1
105. GVWR 29 000 LBS 1
106. 10,000 LBs Front Axle Rating 1
107. 19,000 LBs Rear Axle Rating 1
108. Maxxforce DT 1
109. Allison RDS -2500 Automatic Transmission 1
110. 07BDN - Navistar 4300/4400 series Recommended Exhaust (Right - Horizontal- Under- 1
cab - Vertical)
111. 12VZA - International PTO Throttle Wiring 1
112. International /Allison 2000 Series Body Builder Connection (13WDH) 1
113. International Heavy Duty Taillight Wiring (08HAB) 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 8 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
@fflupltec Altec, Inc.
114. International Vertical Exhaust To Be Even With Top Of Cab (01WCM) and (01WAZ) 1
115. International Transmission Dipstick Relocated to RH Side Of Transmission (13WGH) 1
116. Air Brakes 1
117. No Idle Engine Shut -Down Required 1
118. 4x2 Drivetrain 1
119. Conventional Cab 1
Additional Pricing
120. GSA Order Designation 1
Miscellaneous
121. Standard Altec Warranty 1
One (1) year parts warranty
One (1) year labor warranty
Ninety (90) days warranty for travel charges
Limited Lifetime Structural Warranty
Altec Industries, Inc.
BY
Travis R Evans
Notes:
1 Altec Standard Warranty:
One (1) year parts warranty.
One (1) year labor warranty.
Ninety (90) days warranty for travel charges.
Warranty on structural integrity of the following major components is to be warranted for so long as the
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 9 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
® Altec, Inc.
initial purchaser owns the product: Booms, boom articulation links, hydraulic cylinder structures, outrigger
weldments, pedestals, subbases and turntables.
Bidder is to supply a self- directed, computer based training (CBT) program. This program will provide
basic instruction in the safe operation of this aerial device. This program will also include and explain ANSI
and OSHA requirements related to the proper use and operation of this unit.
2 F.O.B. - #FOB_TERMS#
3 Unless otherwise noted, all measurements used in this quote are based on a 40 inch (1016mm) chassis
frame height and standard cab height for standard configurations.
4 Changes made to this order may affect whether or not this vehicle is subject to F.E.T. A review will be
made at the time of invoicing and any applicable F.E.T. will be added to the invoice amount.
5 Price does not reflect any local, state or Federal Excise Taxes (F.E.T). The quote also does not reflect any
local title or licensing fees. All appropriate taxes will be added to the final price in accordance with
regulations in effect at time of invoicing.
6 Terms: If chassis is ordered through ALTEC Industries, Inc. the chassis payment is due upon receipt of the
chassis at ALTEC Industries, Inc. Balance is due NET 30 days after receipt of completed unit.
7 Interest charge of 1/2% per month to be added for late payment.
8 Delivery: days after receipt of order PROVIDING:
A. Chassis is received a minimum of sixty (60) days before scheduled delivery.
B. Approval drawings are returned by requested date.
C. Vendor or customer supplied accessories are received by date necessary for compliance with scheduled
delivery.
D. Altec makes every effort to meet the delivery commitments we provide to our customers. Unfortunately,
if a chassis manufacturer fails to deliver the bare chassis to our plant for the installation of our equipment,
we cannot deliver a finished product to you, our customer. Recent inconsistencies by some chassis
manufacturers have forced us to include this disclaimer in every bid. If a chassis manufacturer halts or
delays production for any reason, Altec cannot be held responsible.
9 Trade -in offer is contingent upon equipment being maintained to DOT (Department of Transportation)
operating and safety standards. This will include, but not limited to tires, lights, brakes, glass, etc. If a
trade -in is not maintained to DOT standards, additional transportation expenses will apply and could be
invoiced separately.
All equipment, i.e., jibs, winches, pintle hooks, trailer connectors, etc., are to remain with the vehicle unless
otherwise agreed upon in writing by both parties. Altec Industries reserves the right to re- negotiate its
trade -in offer if these conditions are not met.
Customer may exercise the option to rescind this agreement in writing within sixty (60) days after receipt of
purchase order. After that time Altec Industries will expect receipt of trade -in vehicle upon delivery of new
equipment as part of the terms of the purchase order.
10 This quotation is valid until AUG 19, 2011. After this date, please contact Altec Industries, Inc. for a
possible extension.
11 After the initial warranty period, Altec Industries, Inc. offers mobile service units, in -shop service and same
day parts shipments on most parts from service locations nationwide at an additional competitive labor and
parts rate. Call 877- GO -ALTEC for all of your Parts and Service needs.
12 If you are providing the chassis, Altec will review your chassis specifications to try to determine any areas
that may affect the ability of the chassis to be used for this application. Please be advised that some
chassis configurations with the 2010 emissions changes will not be usable in a utility truck application)
Altec MUST have access to COMPLETE specs in order to insure viability of your chassis.
The chassis will be inspected upon receipt by Altec. Any chassis mounted components including, but not
limited to fuel tanks, air tanks, battery boxes, and exhaust systems that have to be relocated in order to
properly install equipment will be brought to the customer's attention at the time of discovery and invoiced
at the time of completion of the unit.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 10 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number:
m
Altec, Inc.
13 Please direct all questions to No Sales Credit at
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 11 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929